jrsc GSR belt size??

[kameleon]

what size for the JRSC belt on a 98 GSR with JR crank pulley and ENDYN stepper pulley???
part number or how many ribs+lenght???
thank you!

[grand600intercooled]

I will have to let Jim answer this one. I think both my belts are 10mm smaller [img]smile.gif[/img]

[kameleon]

ttt

[CROM]

NOTE: All Belts are 4-rib, NAPA Belts run smaller than all other belts, so sizes will need to be increased(10-20mm) from the listed sizes below!

You're gonna need a 640mm belt from the blower to the alternator(stepper) and a 820mm-840mm belt for the alternator to crank.

Stock Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 33" = 835mm

6psi JRSC Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 24.5" = 620mm

9psi Stepper
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 640mm

10psi JRSC with CRV Pulley Belt Sizes
AC = ????
PS = 900mm = 35.5?
Alt. = 850mm = 33.5?
Blower = 24.5" = 620mm

8psi JRSC with Blower Pulley Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 23.4"-24" = 595mm-610mm

<font color="#a62a2a" size="1">[ April 14, 2003 10:35 PM: Message edited by: CROM ]</font>

<font color="#a62a2a" size="1">[ April 14, 2003 10:39 PM: Message edited by: CROM ]</font>

[JRCivic]

Looks like CROM is right on Target !!!

[CROM]

We need an FAQ section, and that chart for belt sizes definitely needs put in it.

[kameleon]

wich of the five do i fall into?
i have the Jackson Racing Crank upgrade pulley,and the endyn stepper pulley on the alternator?
sorry guys but I'm all mixed up!confused! [img]confused.gif[/img] [img]graemlins/cry.gif[/img]

[CROM]

<BLOCKQUOTE><font size=2 face="Verdana, Helvetica, sans-serif">quote:</font><table border="0" width="90%" bgcolor="#333333" cellspacing="1" cellpadding="0"><tr><td width="100%"><table border="0" width="100%" cellspacing="0" cellpadding="2" bgcolor="#FF9900"><tr><td width="100%" bgcolor="#DDDDDD"><font size=2 face="Verdana, Helvetica, sans-serif">You're gonna need a 640mm belt from the blower to the alternator(stepper) and a 820mm-840mm belt for the alternator to crank.</font></td></tr></table></td></tr></table></BLOCKQUOTE>

Read what I said in my post above.

<font color="#a62a2a" size="1">[ April 15, 2003 10:05 PM: Message edited by: CROM ]</font>

[kameleon]

sorry for the confusion!!
Thanks a million!!!!!!!!!!!!!! [img]graemlins/thumbs_up.gif[/img] [img]graemlins/thumbs_up.gif[/img] [img]graemlins/thumbs_up.gif[/img]

[yodas-gsr]

hey guys

i have the high boost JC crank and the mvm stepper, and i need all the sizes of the belts, im pretty sure that the crank to alternator is 820 and alternator to the blower is 840. but what is the power steering, ac...?

thanks,
yoda